| AcceptConnection |
Socket is listening. |
| AddMembership |
Add an IP group membership. |
| AddSourceMembership |
Join a source group. |
| BlockSource |
Block data from a source. |
| Broadcast |
Permit sending broadcast messages on the socket. |
| BsdUrgent |
Use urgent data as defined in RFC-1222. This option can be set only once, and once set, cannot be turned off. |
| ChecksumCoverage |
Set or get UDP checksum coverage. |
| Debug |
Record debugging information. |
| DontFragment |
Do not fragment IP datagrams. |
| DontLinger |
Close socket gracefully without lingering. |
| DontRoute |
Do not route; send directly to interface addresses. |
| DropMembership |
Drop an IP group membership. |
| DropSourceMembership |
Drop a source group. |
| Error |
Get error status and clear. |
| ExclusiveAddressUse |
Enables a socket to be bound for exclusive access. |
| Expedited |
Use expedited data as defined in RFC-1222. This option can be set only once, and once set, cannot be turned off. |
| HeaderIncluded |
Indicates application is providing the IP header for outgoing datagrams. |
| IPOptions |
Specifies IP options to be inserted into outgoing datagrams. |
| IpTimeToLive |
Set the IP header time-to-live field. |
| KeepAlive |
Send keep-alives. |
| Linger |
Linger on close if unsent data is present. |
| MaxConnections |
Maximum queue length that can be specified by Socket.Listen. |
| MulticastInterface |
Set the interface for outgoing multicast packets. |
| MulticastLoopback |
IP multicast loopback. |
| MulticastTimeToLive |
IP multicast time to live. |
| NoChecksum |
Send UDP datagrams with checksum set to zero. |
| NoDelay |
Disables the Nagle algorithm for send coalescing. |
| OutOfBandInline |
Receives out-of-band data in the normal data stream. |
| PacketInformation |
Return information about received packets. |
| ReceiveBuffer |
Send low water mark. |
| ReceiveLowWater |
Receive low water mark. |
| ReceiveTimeout |
Receive time out. |
| ReuseAddress |
Allows the socket to be bound to an address that is already in use. |
| SendBuffer |
Specifies the total per-socket buffer space reserved for sends. This is unrelated to the maximum message size or the size of a TCP window. |
| SendLowWater |
Specifies the total per-socket buffer space reserved for receives. This is unrelated to the maximum message size or the size of a TCP window. |
| SendTimeout |
Send timeout. |
| Type |
Get socket type. |
| TypeOfService |
Change the IP header type of service field. |
| UnblockSource |
Unblock a previously blocked source. |
| UseLoopback |
Bypass hardware when possible. |